FAQ
How do you backwash a pool?
Backwashing is an essential part of keeping your pool filter running properly. To do it, first turn off the pump. Then, turn the filter valve to the “backwash” setting. Once in place, turn the pump back on and let it run for about one minute, or until the water in the sight glass looks clear. After backwashing, turn the pump off again and switch the valve to “rinse.” Turn the pump on for about 30 seconds, then turn it off once more and set the filter back to “filter” mode.
If you’re unsure, we’re happy to walk you through it.
Crush Pools Services
Welcome to the Poolside Blog
Blogs
Our pool blog keeps you up-to-date on everything from pool equipment to pool parties and so much more.
view all blogs
Read more ---How to bucket test your pool
Contact Crush Pools Inc for all your pool needs! We take care of everything for you from opening to closing pool maintenance and equipment and much more.
Read more ---The Pool Trap You Didn’t See Coming: What is Chlorine Lock?
There’s nothing more frustrating for a pool owner than looking out at a pool that has suddenly turned cloudy, dull, or full-on green. You break out your test kit, expecting to see zero chlorine. But to your surprise, the reading comes back high right in the ideal zone! So why is your pool turning into…
Read more ---The Crush Pools Early Opening Check-Up: Finding Your Pool’s Chemical “Sweet Spot”
You've opened your pool early, added the essentials, and the water is looking great. Congratulations! You've avoided the green mess that plagues late openers. But your job isn't quite done. If you have a saltwater pool (and 80% of our clients do), the first week of operation is the most critical time to establish your…